EC/TDS Probe for Mini Controller$64.00
The HI7632-00 is a two-pole amperometric EC/TDS probe for panel mounted mini controllers that measure in the high range (mS/cm and ppt). This probe has a built-in temperature sensor for Automatic Temperature Compensation and a ½ " male NPT threaded connection for insertion mounting. The HI7632-00 probe provides a rapid response and high accuracy EC or TDS measurement.
- Two-pole amperometric probe
- Internal temperature sensor
- High range measurement (mS/cm and ppt)
*Products classified as Dangerous Goods can only be shipped via ground.
Thank you for your interest in our products. A representative will contact you within the next 2 hours.
The HI7632-00 is an amperometric sensor, utilizing two-pole technology to achieve accurate EC and TDS measurements. An alternating voltage is applied to the two electrodes and the generated current is measured. The HI7632-00 is compatible with the following mini controllers that measure in the high range:
Internal Temperature Sensor
The integrated temperature sensor of the HI7632-00 probe is crucial for accurate EC and TDS measurements. Changes in temperature of a solution will change the ion mobility, which will influence the measurement. For this reason it is important that a fast and stable temperature measurement be taken in order to provide an accurate temperature compensated EC and TDS reading.
The ½” NPT threaded connection of the HI7632-00 allows for insertion mounting into a common “T” fitting without the need for additional hardware.
Multiple Cable Lengths
The HI7632-00 is available with varying lengths of cable based on your specific requirements.
HI7632-00 comes with 2 meters (6.6 feet) of cable attached.
HI7632-00/6 comes with 6 meters (19.7 feet) of cable attached.
Specification Name Detail SKU HI7632-00 Range 0.00 to 10.00 mS/cm Accuracy (@25˚C/77˚F) ±2% F.S. Recommended Operating Temperature automatic from, 5 to 50˚C (41 to 122˚F) with β=2%/˚C Tip / Shape 2 electrode probe Body Length 64 mm (2.5") Cable 2 m (6.6') and 6 m (19.7') based on selection Recommended Use controllers, process equipment Connection ½” threaded male NPT