Foodcare K-Type Thermocouple Thermometer with Ultra-Fast Probe
$122.00Thank you for your interest in our products. A representative will contact you within the next business day.
CAL Check™ Feature
The HI935001 includes Hanna‘s exclusive CAL Check™ technology. CAL Check™ allows the user to check calibration status. If the meter is calibrated, the display will automatically show "0.0°C" during startup.
Low Battery Indicator
The included AAA batteries provide 3500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.
Automatic Shut-off
The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be disabled so that the meter continuously stays on. The auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on.
Built to be Durable
Waterproof casing and optional shockproof rubber boot offers maximum protection for a durable thermometer than can handle any environment.
Portable Design
Made to fit comfortably in your hand for on-the-go testing, the large LCD display provides at-a-glance readings from any angle.
Single Button Operation
With single button operation, temperature measurements could not more simple. This single button turns the meter on and off and allows you to cycle through options when in Setup Mode.
Completely Interchangeable Probes
The HI9350011 works with a wide range of thermistor probes, including an assortment of specially engineered FC766 probes, so you can get the right probe for your needs.
Supplied with the FC766PW
The FC766C1 is a rugged penetration probe designed for general food use. The stainless steel probe is both durable and easy to clean, the perfect combination to meet the tough environment encountered in the food sector.
NIST Traceable Calibration Service
This meter can be provided with a calibration certificate traceable to the National Institute of Standards and Technology (NIST) upon request. Traceabilty to NIST makes it possible to achieve the highest levels of measurement quality and productivity.
Don't Forget!
Add your reagents or accessories now to save time and money later!
Resources
-
Specifications
Specification Name Detail sku HI9350011 Range -50.0 to 199.9 °C ; 200 to 300 °C -58.0 to 399.9 °F ; 400 to 572 °F Resolution 0.1 °C (-50.0 to 199.9 °C) 1 °C (200 to 300 °C) 0.1 °F (-58.0 to 399.9 °F) 1 °F (400 to 572 °F) Accuracy (@20˚C/68˚F) ±0.4 °C (-50.0 to 300 °C) ±0.7 °F (-58.0 to 572 °F) Probe FC766C1 K-type thermocouple probe Probe Accuracy ±1.6 °C (-50.0 to 300 °C) ±2.9 °F (-58.0 to 572 °F) Response time for 90% of final value 4 seconds Battery 1.5V AAA (3 pcs.) approx. 3500 hours of continuous use Auto-Off user selectable: 8 min, 60 min or disabled Environment Rated operating condition: -20 to 50 °C (-4 to 122 °F) Limiting condition: -30 to 50 °C (-22 to 122 °F) Storage and transportation condition: -40 to 70 °C (-40 to 158 °F) Relative Humidity 100 % Storage/transport temperature -40 to 70 °C (-40 to 158 °F) Dimensions 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”) Weight 178 g (6.27 oz.) Note *The measurement range may be limited by probe type, and applies to the probe shaft. Warranty 2 years - Product Manuals
