Conductivity Controller (0.00 to 19.99 μS/cm)

BL983322

Conductivity Controller (0.00 to 19.99 μS/cm)

$220.00

The BL983322 is a compact, panel mounted, process controller for measuring electrolytic conductivity (EC) of a process stream. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid that switches from one DI (deionized) tank to another or to open a valve that will allow lower EC water to flow into a tank being monitored in order to lower its EC. The BL983322 can also be used to monitor the quality of water from DI tanks or from a distillation apparatus. The BL983322 measures EC from 0.00 to 19.99 μS/cm.

Multicolor LED Indicator
Fire Retardant Casing
Fire Retardant Casing

Learn More

Thank you for your interest in our products. A representative will contact you within the next business day.

conductivity-controller-bl983322-angle

Adjustable Dry Contact Dosing Relay

The BL983322 features a dosing relay that is activated when the reading is above a user programmable set point.

Programmable Overdose Protection

For enhanced safety the mini controller can be programmed to deactivate the dosing relay if the set point is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled.

Relay Control Override

With the flick of a switch the mini controller's relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump.

Multicolor LED Indicator

Multicolor LED indicator allows an operator to quickly check the status of the controller.

Green = Meter in measurement mode and reading is below the set point.
Orange/Yellow = Reading is above the set point and the relay is activated.
Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded.

conductivity-controller-bl983322-rear

Fuse Protected Dosing Contacts

The relay dosing contact is rated for up to a 2A load and is fuse protected.

Labeled Termination Connections

Quick-connect terminal blocks are clearly labeled for easy connection to power, conductivity probe and relay that can be used to operate a dosing pump, valve, audible alarm, or light.

male-threaded-amperometric-probe-hi7634

1/2" NPT Male Threaded Amperometric Probe for Mounting In-line*

The BL983322 mini controller uses the HI7634-00 conductivity probe that is available with different cable lengths.

*HI7634-00 is not included and must be ordered separately

Front View

Installation cut-out dimensions are provided as well as outside panel dimensions.

Side View

Adjustable location brackets allow the controller to slide easily and securely into place.

Resources

Specifications

Specification Name	Detail
SKU	BL983322
EC Range	0.00 to 19.99 μS/cm
EC Resolution	0.01 μS/cm
EC Accuracy (@25°C/77°F)	±2% F.S.
Temperature Compensation	automatic from 5 to 50°C (41 to 122°F) with ß =2%/ºC
Calibration	manual, with CAL trimmer
Dosing Relay	maximum 2A (fuse protected), 250 Vac, 30 VDC contact closed when measure > setpoint
Setpoint	adjustable from 0 to 19.99 μS/cm
Overtime	adjustable, typically from 5 to approximately 30 minutes
Power Supply	models “-0”: 12 VDC adapter (included) models “-1”: 115/230 VAC; 50/60Hz
Dimensions	83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’)
Weight	models “-0”: 200 g (7.1 oz.) models “-1”: 300 g (10.6 oz.)
Ordering Information	Supplied with mounting brackets, transparent cover and instruction manual.
Recommended Probe	HI7634-00 EC/TDS probe with internal temperature sensor and 2 m (6.6’) cable (not included).

Product Manuals

ISTBL3322_04_13 Download