|Search By Accuracy|
BL 983317 is a panel mounted mini controller with an output relay that has been designed for easy, affordable installation in tight spaces—ideal for simple yet effective process control.
This instrument is provided with automatic compensation for variations in temperature. The probe (not included) is easy to clean and requires very little maintenance. The calibration is performed at one point, through a trimmer.
All wiring and connections to external devices are done through the terminals
on the rear panel. The multicolor LED continuously indicates if the controller is in measurement, dosing or alarm mode.
Users can choose automatic or manual dosing mode by a switch on the front panel. Manual control is particularly useful during maintenance operations because it permits operators to enable or disable the dosing relay according to need. To help prevent overdosing, the overtime control system advises users when the relay is active
BL 983317-0 (12 VDC), BL 983317-1 ( 115/230V), are supplied with mounting brackets, transparent cover and instruction manual.
|Range||0.00 to 10.00 mS/cm|
|Accuracy @ 25°C||±2% F.S.|
|Probe||HI 7632-00 EC/TDS probe with internal temperature sensor and 2 m (6.6’) cable (not included)|
|Temperature Compensation||Automatic, 5 to 50°C (41 to 122°F) with ß = 2%/°C|
|Calibration||manual, with CAL trimmer|
|Dosing Relay||maximum 2A (fuse protected), 250 Vac, 30 VDC, contact close when measure < set point|
|Setpoint||adjustable from 0 to 10 mS/cm|
|Overtime||adjustable, typically from 5 to approx. 30 minutes|
|Power Supply||See Chart|
|Dimensions||79 x 49 x 95 mm (3.1 x 1.9 x 3.7’’)|
|HI 7632-00||Conductivity Probe, 2 m cable|
|HI 7031L||1413 µS/cm EC Solution, 500 mL Bottle|
|HI 7039L||5000 µS/cm EC Solution, 500 mL Bottle|
|HI 7061L||General Purpose Cleaning Solution
1 x 500 mL bottle
|HI 710005||Power Adapter, 115 Vac to 12 VDC, US Plug|
|HI 710006||Power Adapter, 230 Vac to 12 VDC, European Plug|
|HI 740146||Mounting Brackets for BL 931700 Housing|