HI 21 Series Wall Mounted Microprocessor pH Controllers with Matching Pin

Home > Process Instrumentation > Wallmount

HI 21 Series

Wall Mounted Microprocessor pH Controllers with Matching Pin

All Products:

	HI 21 Series Wall Mounted Microprocessor pH Controllers with Matching Pin
	HI 22 Series Wall Mounted Microprocessor ORP Controllers with Matching Pin
	HI 23 Series Wall Mounted Microprocessor EC Controllers with 4-ring Potentiometric Probe
	HI 24 Series Wall Mounted Microprocessor EC and TDS Controllers with 4-ring Potentiometric Probe
	HI 9910 Wall Mounted pH Controller with Single Set point and Proportional Dosage
	HI 9911 Wall Mounted pH Controller with Dual Set point and Proportional Dosage
	HI 9912 Proportional pH and ORP Control in a Single Wall Mounted Unit
	HI 9913 Proportional pH and Conductivity Control for Fertigation
	HI 9914 Wall Mounted Fertigation Controller
	HI 9920 Wall Mounted ORP Controller with Proportional Dosage
	HI 9923 Wall Mounted pH and Conductivity Controller for Boilers and Cooling Towers
	HI 9931 Wall Mounted EC Controller with Proportional Function for Hydroponics and Fertigation
	HI 9934 Wall Mounted TDS Controller with Proportional Function for Hydroponics and Fertigation
	HI 9935 pH and TDS Proportional Control for Fertigation

Description
Specifications
Order Info
Downloads

The HI 21 controllers are simple-to-operate, microprocessor-based process meters packed with features. For more flexibility and better resolution for chart recorders, any two points between 0 and 14 pH can be chosen to correspond to the analog output spans. Some HI 21 models are equipped with a bi-directional RS485 port, which allows remote control of the instrument from a PC.

Push button password programming prevents tampering. The microprocessor memory is fully programmable and has a 3 month backup power supply. The fail Safe Alarm system protects the HI 21 against the pitfalls of process control, like power interruption or line failure.

With HI 21 quick 1, 2 or 3 point calibration at pH 4.01, 7.01 and 10.01 comes standard.

The temperature can be manually or automatically compensated for. You can also choose from ON/OFF, Proportional and PID control to save on chemicals.

Range		0.00 to 14.00 pH; -9.9 to 120°C
Resolution		0.01 pH; 0.1°C
Accuracy		±0.02 pH; ±0.5°C
Input Impedance		10¹² Ohm
pH Calibration		automatic, 1, 2 or 3 point, at pH 4.01, 7.01, 10.01
Temperature Compensation		Automatic (Pt100 probe) or manual from -9.9 to 120°C
Digital Output		RS485 bi-directional opto-isolated;
Analog Output		0-1 mA, 0-20 mA and 4-20 mA, 0-5 Vdc, 1-5 Vdc and 0-10 Vdc
Setpoint Relay		1 or 2 contact outputs SPDT 5A-250 Vac, 5A-30 Vdc (resistive load); fuse: 5A, 250V
Alarm Relay		contact outputs SPDT 5A-250 Vac, 5A-30 Vdc (resistive load); fuse: 5A, 250V
Power Supply		115 Vac ±10% or 230 Vac ±10%; 50/60 Hz; fuse: 400 mA, 250 V
Power Consumption		15 VA
Environment		0 to 50° (32 to 122°F); RH max 85% non-condensing
Protection		IP 54
Dimensions		221 x 181 x 86 mm (8.7 x 7.1 x 3.4")
Weight		1.4 kg (3.1 lb.)

Manual: (Download)
Literature: (Download)

Search HANNA

Products