Home > Multiparameter > Portable
HI 98280
GPS Multiparameter Meter with Fast Tracker™ Tag Identification System
All Products:
- Description
- Specifications
- Accessories
- Order Info
- Downloads
HANNA’s new HI 9828 multiparameter portable meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated).
Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).
For measuring points within a 30 ft range or where GPS signals are not available, HI 9828’s Fast Tracker™ is invaluable for associating measurements with their locations.
HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.
The HI 9828 has a graphic, backlit display that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.
Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.
Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi sensor probe can be left underwater (IP68 standard).
GPS (Global Positioning System) Enabled
The new HI 9828 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m) so you can be sure that you return to the same location for repeated measurements.
Basic GPS Features
• GPS coordinates shown on the LCD with up to 10 measurement parameters
• GPS signal strength shown on LCD
• Number of satellites shown on LCD
• Logged data is embedded with GPS coordinates
Advanced GPS Features
• Users can associate GPS coordinates with alphanumeric locations
• Distances between current location and predefined locations are displayed arranged by distance
• Memorizes last location and time should signal be lost
Track Measurement Locations
Users can connect to GPS tracking software such as Google™Maps* to view locations where samples have been taken.
Measurement information is shown right on the map.
HI 929828 PC Software
• Manages logged data from
the HI 9828
• Displays GPS coordinates with
logged data
• Automatically maps samples on your PC (internet connection required)
• Shows location points on map along with measurement data
Fast Tracker™ Tag Identification System
HANNA’s iButton® Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user-entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.
Features
• Display up to 12 parameters
• Track measurement locations
with GPS
• Meter features IP67 and probe
features IP68 waterproof
protection
• Exclusive Fast Tracker™—Tag I.D.
System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick Calibration feature
• Measurement check eliminates
any erroneous readings
• Auto recognition of pH and
pH/ORP probe
• Logger function records the
data of all connected sensors
• Log-on-demand and automatic
logging (up to 60,000 samples)
• Can display logged data as graphs
• USB for PC connectivity
• Auto-range of EC and TDS readings
• Good Laboratory Practice feature
with the last 5 calibrations recorded
• All sensors are field replaceable
• Meter accepts both alkaline and
rechargeable batteries
• Rugged probe with stainless steel
tip has a diameter under 2” for
wells and pipes
* GOOGLE™ is a registered trademark of Google, Inc. HANNA instruments® has no affiliation with Google™, Inc.
| Range | pH | 0.00 to 14.00 pH |
| Resolution | pH | 0.01 pH |
| Accuracy | pH | ±0.02 pH |
| Range | mV of pH input | ±600.0 mV |
| Resolution | mV of pH input | 0.1 mV |
| Accuracy | mV of pH input | ±0.5 mV |
| Range | ORP | ±2000.0 mV |
| Resolution | ORP | 0.1 mV |
| Accuracy | ORP | ±1.0 mV |
| Range | Dissolved Oxygen | 0.0 to 500.0% / 0.00 to 50.00 mg/L |
| Resolution | Dissolved Oxygen | 0.1% / 0.01 mg/L |
| Accuracy | Dissolved Oxygen | 0.0 to 300.0%: ±1.5% of reading or ±1.0% whichever is greater; 300.0 to 500.0%: ±3% of reading; 0.00 to 30.00 mg/L: ±1.5% of reading or 0.10 mg/L whichever is greater; 30.00 mg/L to 50.00 mg/L: ±3% of reading |
| Range | Conductivity | 0.000 to 200.000 mS/cm (absolute EC up to 400 mS/cm) |
| Resolution | Conductivity | Manual: 1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm; Automatic: 1 µS/cm from 0 to 9999 µS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm ; 0.1 mS/cm from 100.0 to 400.0 mS/cm; Automatic mS/cm: 0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm |
| Accuracy | Conductivity | ±1% of reading or ±1 µS/cm whichever is greater |
| Range | Resistivity | 0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm |
| Resolution | Resistivity | Dependent on resistivity reading |
| Range | TDS | 0 to 400000 mg/L or ppm (the maximum value depends on the TDS factor) |
| Resolution | TDS | Manual: 1 mg/L (ppm); 0.001 g/L (ppt); 0.01g/L (ppt); 0.1 g/L (ppt); 1 g/L (ppt); Auto-range scales: 1 mg/L (ppm) from 0 to 9999 mg/L (ppm); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt); Auto-range g/L (ppt) scales: 0.001 g/L (ppt) from 0.000 to 9.999 g/L (ppt); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt) |
| Accuracy | TDS | ±1% of reading or ±1 mg/L |
| Range | Salinity | 0.00 to 70.00 PSU (Extended Practical Salinity Scale) |
| Resolution | Salinity | 0.01 PSU |
| Accuracy | Salinity | ±2% of reading or 0.01 PSU whichever is greater |
| Range | Seawater Specific Gravity | 0.0 to 50.0 σt, σ0, σ15 |
| Resolution | Seawater Specific Gravity | 0.1 σt, σ0, σ15 |
| Accuracy | Seawater Specific Gravity | ±1 σt, σ0, σ15 |
| Range | Atm. Pressure | 450 to 850 mmHg; 17.72 to 33.46 inHg; 600.0 to 1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa |
| Resolution | Atm. Pressure | 0.1 mmHg; 0.01 inHg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa |
| Accuracy | Atm. Pressure | ±3 mmHg within ±15°C from the temperature during calibration |
| Range | Temperature | -5.00 to 55.00°C; 23.00 to 131.00°F; 268.15 to 328.15K |
| Resolution | Temperature | 0.01°C; 0.01°F; 0.01K |
| Accuracy | Temperature | ±0.15°C; ±0.27°F; ±0.15K |
| Calibration | pH | Automatic 1, 2, or 3 points with 5 memorized standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or 1 custom buffer |
| Calibration | ORP | Automatic at 1 custom point |
| Calibration | Conductivity, Salinity | Automatic 1 point with 6 memorized standards (84 μS/cm, 1413 μS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point |
| Calibration | Dissolved Oxygen | Automatic 1 or 2 points at 0, 100% or 1 custom point |
| Calibration | Resistivity, TDS | Based on conductivity or salinity calibration |
| Calibration | Atm. Pressure | Automatic at 1 custom point |
| Calibration | Temperature | Automatic at 1 custom point |
| Temperature Compensation | Automatic from -5 to 55°C (23 to 131°F) | |
| Logging Memory | Up to 60000 samples with 13 measurements each Up to 45,000 samples with 15 measurements each (GPS) | |
| Logging Interval | 1 second to 3 hours | |
| Computer Interface | USB (with HI 929828 software) | |
| Waterproof Protection | Meter IP67, Probe IP68 | |
| Environment | 0 to 50°C (32 to 122°F); RH 100% | |
| Power Supply | (4) 1.5V alkaline C cells (approx. 150 hours of continuous use without backlight) /(4) 1.2V rechargeable C cells (approx. 70 hours of continuous use without backlight) | |
| Dimensions Meter | 221 x 115 x 55 mm (8.7 x 4.5 x 2.2”) | |
| Dimensions Probe | 270 x 46 mm DIA (10.6 x 1.8"DIA) | |
| Weight | Meter: 750g (26.5 oz.); Probe: 750g (26.5 oz.) |
| Accessories | |
|---|---|
| HI 7698281 | USB Interface Cable |
| HI 7698282 | Probe Maintenance Kit |
| HI 7698283 | Calibration Beaker |
| HI 7698284 | Flow Cell |
| HI 710045 | |
| HI 710046 | |
| HI 920005 | Tag Identification System (T.I.S.) |
| Probes | |
| HI 769828-0 | pH Sensor |
| HI 769828-1 | pH/ORP Sensor |
| HI 769828-2 | DO/Temperature Sensor |
| HI 769828-3 | EC Sensor |
| Quick Calibration Solutions | |
| HI 9828-27 | Quick Calibration Solution 1G |
| HI 9828-25 | Quick Calibration Solution 500mL |
| pH Calibration Solutions | |
| HI 7004L | 4.01 pH Buffer Solution 1 x 500 mL bottle |
| HI 7007L | 7.01 pH Buffer Solution 1 x 500 mL bottle |
| HI 7010L | 10.01 pH Buffer Solution 1 x 500 mL bottle |
| ORP Calibration Solutions | |
| HI 7021L | ORP Test Solution at 240 mV (@20°C) 1 x 500 mL bottle |
| HI 7022L | ORP Test Solution at 470 mV (@20°C) 1 x 500 mL bottle |
| Dissolved Oxygen Solutions | |
| HI 7040L | 0 Oxygen Solution 1 x 500 mL bottle |
| HI 7042S | Electrolyte Solution for Galvanic Probes 1 x 30mL bottle |
| Conductivity Calibration Solutions | |
| HI 7030L | 12880 µS/cm (µmho/cm) 1 x 500 mL bottle |
| HI 7031L | 1413 µS/cm (µmho/cm) 1 x 500 mL bottle |
| HI 7033L | 84 µS/cm (µmho/cm) 1 x 500 mL bottle |
| HI 7034L | 80000 µS/cm (µmho/cm) 1 x 500 mL bottle |
| HI 7035L | 111800 µS/cm (µmho/cm) 1 x 500 mL bottle |
| HI 7039L | 5000 µS/cm (µmho/cm) 1 x 500 mL bottle |
| TDS Calibration Solutions | |
| HI 7032L | 1382 ppm (mg/L) 1 x 500 mL bottle |
| HI 7036L | 12.41 ppt (g/L) 1 x 500 mL bottle |
| Cleaning and Maintenance Solutions | |
| HI 70300L | Electrode Storage Solution 1 x 500 mL bottle |
| HI 7061L | General Purpose Cleaning Solution 1 x 500 mL bottle |
Manual: (Download)
Literature: (Download)